Our standard marine specification is suitable for most applications and includes:
• Heat exchanger cooling system, raw water pump, water-cooled exhaust manifold
• Fuel, lubricating oil and air filter
• 12 volt or 24 volt electric start with charging alternator (insulated return)
• Protection switches for low oil pressure and high engine temperature
• Wiring to control panel
• Newage Stamford marine alternator with anti-condensation heater
• Sump drain pump
• Exhaust compensator
• Steel base frame with inboard captive anti - vibration mountings
• Set mounted Lucas lead acid batteries installed with leads and terminals
If the standard marine specification is not suitable, we usually can design to comply with the customers specification.
We can offer a wide variety of road trailers which are designed to match the generator and the environment in which it will be used.
All our enclosures are designed to protect the generator against torrential rain and are ventilated to allow operation in high temperatures.
The noise level of the standard sound proofed enclosure is no more than 85dBA at one metre or 68dBA at 7 metres.
The noise level of the super sound proofed enclosure is no more than 75dBA at one metre or 62dBA at 7 metres.
In some cases (particularly smaller sets),it is possible to reduce the noise level to 65dba at one metre.
Enclosures are manufactured from mild steel panels having acoustic insulation throughout. The enclosure is designed
to fit the base frame in order to provide a self-contained unit that can easily be moved from site to site.
Features:
• Noise attenuated air inlet duct with a bird screen • Hot air discharge plenum installed within the canopy
• Noise attenuated air outlet duct with grille/fixed louvres • Hinged access doors along each side.
The number and arrangement of doors depends upon the size of the generator.
• Plated lockable door slam catches • Rain gutters • Gland plate for cable access
• Purposely fabricated base fuel tank to suit the enclosure
• Thermally insulated exhaust manifold(s)and compensator(s)
• Alternator mounted profile control panels are mounted side facing as standard to enable viewing with the door open
• A Perspex viewing window is available as an extra cost option.
• Lifting points can be provided on the base,or a central lifting eye can be provided.
Control Panel and
Generator Access
• See closed and open views of these two examples
• Alternator mounted profile control panels are mounted side facing as standard to enable viewing with the door open.
• Hinged access doors along each side.
Generators can be installed in modified 20ft or 40ft ISO containers with a noise level not exceeding 85dba at one metre. The installation can be designed to meet a customers requirements,modifications to the container typically include:
• Steel chequer plate floor
• Mineral wool/perforated steel insulation
• Internal inlet and outlet attenuators with fixed blade weather louvres
• Roof mounted or internal exhaust silencer(s) with tailpipe(s)
• Internal fuel tank -base mounted or separately mounted
• Locked personnel access door
• Internal fluorescent lighting with on/off switch
• ISO lifting points
|
Generator Self Assembly Kits Mobile Tower Lights Spare Parts
|